Tub Repair Kit White Tile for Fiberglass Porcelain Ceramic, Fix Crack Chip Scrap

Description

Use to repair chips, scratches, dents, cracks, worns and holes for any porcelain ceramic surface like tub, tile, shower, bathtub, vanities, sink. Also work on fiberglass, stone.
All of our mixture are permanent repairs and stronger than the original stone.
Do DIY repairs in a few simple steps:
All you need is mix repair compound part A and Part B together
Apply them to demaged area
Then smooth the surface.
Once dried, the surface is a porcelain-like appearance.
Kit Includes;
Compound part A (50g/1.7oz)
Compound part B (50g/1.7oz)
Glove x 2
Sandpaper x 2
Spatula x 2
Transprent masking tape x 3.
Got a chip in your tub? Are you in need of bathtub repairs?
Scrapes and scuffs on a tub’s surface will eventually lead to more problems down the road. At the very least, they can leave the surface looking ugly.
If your tub is white and needs a few chips, scratches, holes, cracks covered up, the NADAMOO Tub repair Kit is the choice for you.
Most bathtub repairs are completed in under a few minutes.
You will even be able to use your tub the very next day.
The kit comes with all the basic supplies required to repair, including the gloves, spatula, masking tape, sandpaper, compound part A, compound part A.
Mix compound Part A with compound Part B together, apply the mixture to damaged area. It will seal up the small pits and scrapes, surface blemishes will disappear so the tub is new and smooth once again.
This mixture dries into a hard finish in 12-24 hours.
Once dried, it matches most white finishes and provides a glossy shine to the surface.
Repair kit can be successfully performed on all types of porcelain tubs as well as tubs made of fiberglass, or cultured marble. Usable on a variety of porcelain surfaces like ceramic tiles, sinks, and showers in addition to tubs.
With strong adhesion and good stickness, the mixture can also be used as an adhesive for joint of component for wood, acrylic, ceramics, porcelain, stone.