Original Roland FH-740 VS-640 DX7 / DX6 Printhead -6701409010 Fast Shipping

Description

Roland RE640 / VS640 Eco Solvent
Printhead
(DX7) -6701409010
The Roland RE640 / VS640
dx7 printhead
is suitable for Roland VS, RA and RE eco-solvent printers. The Roland RE640 / VS640 DX7 printhead  has a native resolution of 360 dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
The Roland RE640 / VS640 DX7 printhead is either used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for The Roland RE640 / VS640 DX7 printhead is 8 kHz. The Roland RE640 / VS640 DX7 printhead is based upon the most recent Epson technology. This is the original
Roland printhead
(part number 6701409010).
To be used with:
Roland BN-20 / RA-640 / RE-640 / RF-640 / VS-300 / VS-300i / VS-420 / VS-540 / VS-540i / VS-640 / VS-640i / XR-640
Remarks:
Original
Part no.:
6701409010
Specifications:
Model
PRH-ROL-004
Technology
Micro-Piezo
Native resolution
360 dpi
Min. Droplet Size
1.5 pico litre
Tot. Amount of Nozzles
1440 (8 lines x 180 nozzles)
Firing Frequency
8 kHz
Ink Compatibility
eco-solvent and mild solvent
Damper type
requires DX6 Valve Dampers
Attention:
The printhead is required to be installed by professional persons.
Due to the nature of printer parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and contact us via message.
Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible before installing it onto machine. Please be aware that we don't accept any return and refund once the printhead is installed on the machine.
The fragile sticker pasted on printheads is a label to prove that such products are sold from our company. Please be aware that
REMOVING
the label and
INSTALLING
the printhead on your machine, you
WON'T
be entitled to our aftersales services including technical support, return and refund.