NEW 40/60 30/50 20/40 SQUARE D WATER WELL PUMP PRESSURE SWITCH SUBMERSIBLE / JET

Description

NEW Square D Pressure Switch
FREE PRIORITY MAIL SHIPPING TO ANYWHERE IN THE U.S.A
Use:
Submersible or Jet Pump 115v or 230v
Model:
9013FSG2J24
Pressure Settings:
Factory Set at 40/60
Can be easily adjusted to 30/50 20/40 or any other setting.
Has separate differential adjustment to raise or lower cut out pressure without changing cut in pressure.
Important: Air Charge in pressure tank should be set to
2-4 PSI
below cut-in pressure of switch to achieve maximum drawdown of tank and avoid short cycling of pump. The higher the pressure setting is set at will lower the overall drawdown capacity of the pressure tank will be. Failure to adjust the air charge properly can cause the following problems:
Air Charge too Low: Pump will cycle frequently because the pump will come on before tank is drawn down.
Air Charge too High: Tank will draw down completely and pressure will drop off before the pump kicks back on.
If your switch is short cycling(rapidly turning on and off) it is probably due to the fact that your pressure tank is failed and is not a switch malfunction. Always check the air charge in the tank with a tire pressure gauge with the pump off and water pressure drained from the lines.
Connection:
1/4" FEMALE PIPE THREAD
International Buyers - Please Note:
Import duties, taxes, and charges are
not included
in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.