Konica KM1024 MNB 14PL Printhead for Agfa Anapurna M1600 / Allwin C8 / DGI

Description

Konica KM1024 MNB 14PL Printhead
Description:
The Konica Minolta KM1024 MNB print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MNB print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MNB print head has 1024 nozzles with a droplet size of 14 pl and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This is Konica original print head and it includes the Head ID and the necessary waveform information.
To be used with:
Agfa: Anapurna M1600 / :Anapurna M² / :Anapurna M2050 / :Anapurna M2540 FB , Allwin C8, DGI VE-3206, Dilli Neo Titan FB2513-06DW / Neo Titan UVT-1604D
Remarks:
Original
Specification:
Product Name
KM1024MNB
KM1024MHB
Drive Mode
On-Demand Piezo Electric (Shared Wall 3 Cycle)
Nozzle Resolution
180dpi×2 rows = 360dpi
Nozzle Number
512 nozzles×2 rows = 1024
Nozzle Spacing
70.5μm =(141um 2 rows)
Drop Volume
14pl
Firing Frequency
12.8kHz
Print Width
72mm
Dimensions
W131mm × D18mm × H89mm
Solvent ink
OK
UV ink OK
OK
Oil Ink OK
OK
Max. Drops in Greyscale
8drops
Integrated Heater (H)
Available
Attention:
1. The printhead is required to be installed by professional persons.
2. Due to the nature of printer parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer's responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and contact us.
3. Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible before installing it onto machine. Please be aware that we don't accept any return and refund once the printhead is installed on the machine.
4. The fragile sticker pasted on printheads is a label to prove that such products are sold from our company. Please be aware that REMOVING the label and INSTALLING the printhead on your machine, you WON'T be entitled to our aftersales services including technical support, return and refund.