Goulds A2N13, Narrow Angle Control Switch without Plug, 10 ft. Cord 125/250 V

Description

Goulds A2N23 SJE SignalMaster Control Switch
This mechanically-activated, narrow-angle float switch is designed to activate pump control panels and alarms. Normally Open (high level) switch turns on (closes) when the float tips slightly above horizontal signaling a high level and turns off (opens) when the float drops slightly below horizontal.
Applications
Normally open to pump down or empty in:
Potable water
Non-potable water
Sewage
Features
5 amp, 125/250 VAC, 50/60 Hz
Mechanically-activated, snap action contacts
30 feet maximum water depth (30 psi)
Not designed for direct connection to pump
Not sensitive to rotation
Control differential is 1.5" above or below horizontal
Normally open comes with yellow cap for easy identification
Cable is flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
Float is 2.74" diameter x 4.83", high impact, corrosion resistant, polypropylene housing for use in sewage and water up to 140°F
Clamp mounted for applications where the switch can be attached to a discharge pipe or similar mounting device
UL Listed for use in water and sewage
CSA Certified
Note
: This switch is not recommended for controlling electric loads less than 100 milliamps, 12 VAC and non-arcing electric load.
Specifications:
Brand: Goulds
Mfg. Number: A2N13
Series: A2N
Product Type: Narrow Angle Control Switch
Maximum Running Current: 5 Amps
Maximum Starting Current: N/A
Plug Type: Bare Leads
Circuit Type: Normally Open
A2WT Cable Weight: No
Cable Weight (A2WT): No
Mounting Strap: Yes
Cord Length: 10 ft.