Goulds A2H11, Wide Angle 115 V Piggyback Pump Switch, 10 ft. Cord, 13 Amps

Description

Goulds A2H11 SJE VerticalMaster Pump Switch
This mechanically-activated switch is designed for direct control of pumps up to 1/2 HP at 120 VAC in confined applications requiring an accurate pumping range. It works well in small sump chambers, effluent applications, and laundry trays, as well as in large tanks. The SJE VerticalMaster pump switch is not sensitive to turbulence.
Applications
Normally open to pump down or empty in:
Non-potable water
Sewage applications
Features
Controls pumps up to 1/2 HP at 120 VAC within specified amp ratings
13 Amps maximum pump run current
60 Amps maximum pump start current
0.75 to 6.5" adjustable pumping range
Mechanically activated with heavy duty contacts
Wide angle design allows the float switch to operate over a range of approximately 70° to 90°
Cable is flexible 16 gauge, 2 conductor (UL, CSA) SJOW or SJTOW, water-resistant (CPE)
12" diameter x 5" deep x 3" wide overall dimensions
2.3 inch high x 2.8 inch float housing
High impact, corrosion resistant, PVC switch and float housing for use in sewage and non-potable water up to 125°F
Stainless steel mounting bracket and hose clamp
Injection molded acetal plastic lift road
Includes standard boxed packaging
UL Recognized for use in non-potable water and sewage
CSA Certified
Note
: This switch must be used with pumps that provide integral thermal overload protection.
Specifications:
Brand: Goulds
Mfg. Number: A2H11
Series: A2H
Product Type: Wide Angle Pump Switch
Maximum Running Current: 13 Amps
Maximum Starting Current: 60 Amps
Plug Type: 115 volt piggyback
Circuit Type: Normally Open
Cable Weight (A2WT): No
Mounting Strap: Yes
Cord Length: 10 ft.