Glass Furniture Repair Kit with 10g UV Glue, Squeezable Bottle, 9 LED UV Torch

Description

The Kit Contains :
** 10 gram very high viscosity UV Glue to give a clear finish
(in a Squeezable bottle with needle)
** 9 LED UV Torch for Curing the Glue (Functions with 3x AAA batteries - Not Included)
** 5 Pieces Plastic Razor Blades
** 5 Pieces Metal Razor Blades
** 5 Pieces Alcohol Wipes
** 1 Piece Blade Holder
How to Use:
- Mark the spot to repair before you disassemble
- Remove the existing glue residue with scrapper provided. You can either use metal blades or plastic blades
(We recommend to use plastic blades for preventing scratch and damage)
- Clean the Surface using the Alcohol Wipes and Dry perfectly
- Apply the glue in form of a thin layer
- Replace the pieces to Bond
- Use UV Torch from a distance of 2cm-7cm for 40-60 seconds
- Leave it for about 5 to 10 minutes for full bonding. The day light is the best source for curing after curing with torch.
Leaving under direct sun light for couple of hours will give the best result
- You can watch videos on youtube. Search "using uv glue to repair glass furniture" on youtube.
Keep far away from children.
Use at well ventilated place is recommoned.
In case of contact with skin, rinse with soap water immediately.
If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.
For further information, please refer to MSDS.
We can provide safety data sheet upon request
Thanks for Looking